• The magnetic starter is composed of steel stamping shell, steel bottom plate, ac contactor, thermal relay and corresponding wiring.
• It should be equipped with start and stop button switch and correctly connected with manual control signal cable.
• When the start button is pressed, the coil of the ac contactor installed in the magnetic starter gets energized, and the armature drives the contact group to close, and connects the power supply of the appliance (generally the motor), and at the same time, the auxiliary contact locks itself.
| Quantity: |
|---|
Technical Data
| Standard | IEC60947-4-1, IEC60439-1 | Electrical life (X105 times) | 5 |
| Electric ratings | 09, 12, 18,25,32,40,50,65,80,95 | Mechanical life(X105 times) | 50 |
| Approvals | CE | Matched AC Contactor type | SGC 1-D series |
| Rated operational voltage Ue(V) | 690 | Matched Thermal relay type | SGR2-D series |
| Rated insulation voltage Ui(V) | 690 | Ambient air temperature (°C) | -5 to+40,max.95%humidity |
| Rated impulse withstand voltage Uimp(kV) | 8 | Storage temperature(°C) | -40 - +75 |
| Rated frequency(Hz) | 50/60 | Maximum operating altitude (meters) | <2000 |
Product Diagram
Dimensions
SGE1-D
