< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=3832802256749713&ev=PageView&noscript=1"/>

The principle and method of extinguishing the circuit breaker

Author: MAXGE     Publish Time: 2018-11-30      Origin: Site

Arc extinguishing is one of the important applications of circuit breaker, because the arc not only causes damage to the equipment line, but also affects the personal safety. Therefore, it is necessary to extinguish the arc. There are four commonly used methods of extinguishing arcs, including mechanical extinguishing arcs, magnetic blow-out, etc. In this paper, I explain the common method of the arc extinguishing and the arc-suppressing principle of some common circuit breakers.9

Firstly, there are four main types of arc extinguishing methods:

1. Mechanical extinguishing: the arc can be stretched rapidly through the limit device. This method is mostly used in switching appliances.

2, magnetic blow-out: in a contact with a series of magnetic blow under the effects of the magnetic field coil, arc, by the effect of electromagnetic force was blown into a solid medium composed of arcing enclosure, with the solid medium in contact, arc is cooled and go out.

(longitudinal seam) 3, narrow gap arc extinguishing method: in under the action of magnetic field formed by electric arc, arc can make the stretch and into the arcing cover of the narrow seam (vertical), some of the longitudinal seam arc can be divided into fragments and in contact with the solid medium, arc quickly extinguished. This structure is mostly used for ac contactors.

4, grid arc extinguishing method: when contact separated, resulting in under the action of electric arc is pushed into a set of metal gate films and is divided into fragments, each other insulated metal gate electrodes of each piece is the equivalent of a, so there are many extreme pressure drop of Yin and Yang. For the ac arc, near the cathode, a 150V ~ 250V medium intensity will appear at the arc of the arc, so that the arc cannot be maintained. Since the arc effect is much stronger than the dc, the ac appliances often use the grid to extinguish the arc.

These methods are mainly aimed at some low-voltage circuit-breakers. To understand the reasons for the use of these methods, it is necessary to clear out the principle of the circuit breaker's arc extinguishing. The following are discussed for some commonly used circuit breakers.

The arc extinguishing principle of vacuum circuit breaker

In a vacuum circuit breaker, a vacuum arc is generated due to the presence of capacitance between the two contacts and the insulation breakdown between the contacts. Because of the shape and structure of the stylus, the vacuum arc column is rapidly diffused to the vacuum area outside the cylinder. When the current of the broken current is near zero, the temperature and pressure of the electric arc of the contact between the contact is sharply decreased, so that the arc cannot continue to be extinguished. After the electric arc extinguish, the vacuum clearance between the two contacts quickly recovers. At the same time, the contact between the head also reaches a certain distance, can withstand high recovery voltage. Therefore, the general electric current is at zero, the arc will not be broken. That's how it dies.

The principle of arc extinguishing of high pressure drop fuse

We all know that in the case of high voltage large current, switch to arcing often use more complex methods and structure, and the high pressure drop type fuse is only need a simple hose can smoothly and good implementation arcing, the main reason is: first, high pressure drop fuse current is not very big. The arc produced is not very large. Second, it USES air to extinguish the arc. It's kind of like an open arc principle. It's just a different structure.

The above is a summary of the principle and method of circuit breaker arc extinguishing.

Brave the wind and the waves: we are here in exhibition ELEKTRO

Elektro30th international exhibition for electrical equipment for power and electrical engineering will be holding from June6 to 9 on Moscow. Elektro is one of the largest professional power electronics exhibitions in Eastern Europe. It is organized by Russia International Exhibition Center (EXPOCEN

A hiking activity was carried out for celebrating SAP system’s using on MAXGE

To celebrate SAP system officially functioned to MAXGE, to rich and activate the after-office cultural life of employees, to enhance the cohesion of staff, MAXGE held a hiking activity on May 22nd with the theme of “embracing nature, challenging ourselves, concentrating our mind, walking together

Wang Hao, Deputy Secretary of Zhejiang Provincial Party Committee and Governor, visited MAXGE to investigate the company's operation and production during the epidemic

On the afternoon of April 7, Wang Hao, deputy secretary of Zhejiang provincial Party committee and governor of Zhejiang Province, and his party visited MAXGE electric to investigate the development and operation of the company during the epidemic. Wang Gang, Secretary of Huzhou municipal Party commi

MAXGE's SAP is officially launched, and digital production has been greatly improved again. Let's experience the technological power of MAXGE together!

With the advent of the era of Industry 4.0, intelligence and big data have become a new outlet. Enterprises have sought efficient and energy-saving production methods through technological reforms. The two concepts of "smart manufacturing" and "smart factory" came into being. Under such a comprehens

Get A Free Quote







    86-572-8823666
   maxge@maxge.com