Incorrect use of leakage protector

Update date:2018-06-26 Source:maxge

1. Improper selection. The high-sensitivity and rapid type should be adopted for the leakage protector used to prevent electric shock. The product of action current and action time should not exceed 30mAs.

MAXGE EPBR6\10K-i 1P+N


2.Second, know is wrong, some users for hand-held power tools installed leakage protector is daqo, omitted to zero protection, lose protect electrical leakage protection, only the electric shock protection.

MAXGE EPR/4 RCCB


3.Three, use is not standard, the single phase leakage protector in the protective zero line and the work is not separated the zero line, electric leakage protection function failure, once the tool body leakage, short circuit current will also burn leakage protector; Or, although the protection zero line and the working zero line are separated, the ground wire end is suspended in the power socket, which is actually a false ground, so that the leakage protection still cannot play its due protective role.

 MAXGE EPR-2 3+N

Copyright© 2017 www.maxge.com All Rights Reserved.

Copyright© 2017
www.maxge.com All Rights Reserved.

悬浮

CONTACT US

NAME

Email

Phone

MESSAGE

We won't share your info with third parties.