Home distribution box installation points

Update date:2018-06-19 Source:MAXGE

Home distribution box installation points

1. The household distribution box is divided into two types: metal shell and plastic shell. There are two types of surface-mounted and concealed-type. The box must be intact.

2. The internal wiring busbars of the household distribution box shall be respectively established with zero line, protective grounding line and phase line, and shall be intact and well insulated.

COMBINER BOX

3. The mounting bracket of the air switch shall be clean and free from obstruction and have enough space. It shall be installed in a dry and ventilated area with no obstruction and convenient use. The distribution box must not be installed in the cabinet to prevent fire.

4. The distribution box of the household distribution box should not be installed too high. Generally, the installation elevation is 1.8 meters for operation; the electricity pipe of the distribution box must be fixed with a locking nut.

Home distribution box

5. If the distribution box of the household distribution box needs to be open, the edges of the holes must be smooth and clean. When the distribution box is buried in the wall, it should be vertical and horizontal, leave a gap of 5 to 6 mm at the edge, and the wiring in the distribution box. Should be regular and orderly, the terminal screws must be fastened.

 household distribution box

6. Each circuit must have sufficient length to enter the line. No joints are allowed. After the installation, the name of each circuit should be marked. After the household distribution box is installed, the residue in the distribution box must be cleaned.


Copyright© 2017 www.maxge.com All Rights Reserved.

Copyright© 2017
www.maxge.com All Rights Reserved.

悬浮

CONTACT US

NAME

Email

Phone

MESSAGE

We won't share your info with third parties.