Maintenance and attention of solar combiner box

Update date:2017-12-19 Source:MAXGE

1. Periodically check the fuse to prevent the panel from being open when the fuse is blown off.

2. When testing or maintaining the equipment, note that the input and output may be charged to prevent electric shock or damage to other equipment;

3. The user units shall formulate the management system of lightning protection facilities and assign special persons to manage; Pv lightning protection bus box belongs to electrical products, non-professional personnel, please do not remove without permission.

1513647749220149.jpg

4. The solar pv combiner box should  be specially maintained, so as to prevent the lightning protection module from being invalidated, the working state shall be checked regularly. Especially after the lightning, should check in time. If the fault indicator on the panel is changed from "green" to "red", please contact the seller or manufacturer in time.

5. Solar pv combiner box belongs to electrical products, non-professional personnel, please do not remove without permission.

6.If the voltage level of the circuit breaker fails to meet the requirements, the rated working voltage of the circuit breaker can be improved by connecting the two sides of the dc circuit breaker. Dc withstand voltage can reach not less than DC1000V.

Must replace the same grade of fuse with the original model! Please make sure the fuse holder is clamped when the fuse is installed.

7. in the box on the electrical components are the convergence of photovoltaic lightning protection box custom-made products, not mixed with common products, if need to change please contact the seller or producer, and replace the fuse molten core special dc high voltage capacitors (core) pay attention to prevent pv high voltage electric shock cuts.


Copyright© 2017 www.maxge.com All Rights Reserved.

Copyright© 2017
www.maxge.com All Rights Reserved.

悬浮

CONTACT US

NAME

Email

Phone

MESSAGE

We won't share your info with third parties.